Benco V90 Dead Boot Repair Premium Official File Free download without password benco AE9120_S192_23K20 Dead Boot Repair
| Rom Name | Benco Firmware |
| Based On | Benco Stock ROM OS |
| Rom OS Version | Android |
| File Size | 4.4 GB |
| File Type | official |
| Phone Chipset | Unisoc SC9863A |
| Tools Supported | ResearchDownload Tool |
| File Name | benco_AE9120_S192_23K20 [D].rar |
| Drivers Supported | Spreadtrum USB Driver |
| Uploaded | Google Drive |
| File condition | 100% Free service |
How to Flash Benco V90 Using SPD Flash Tools- Install SPD USB Drivers
- Download the Spreadtrum USB drivers compatible with your PC.
- Extract the driver files and run the installer (e.g., DPInst.exe).
- Follow the on-screen instructions to complete the installation.
- Verify the drivers are installed by checking Device Manager (look for "Spreadtrum" or "SCI USB2Serial" when the phone is connected later).
Download and Set Up SPD Flash Tool
- Download the latest SPD Flash Tool from a reliable source.
- Extract the zip file to a folder on your PC (e.g., C:\SPD_Flash_Tool).
- Inside the extracted folder, locate the executable file (e.g., UpgradeDownload.exe) and double-click to launch it.
Load the Firmware
- In the SPD Flash Tool window, click the Load Packet button (usually a gear icon or the first button on the top left).
- Browse to the location of your Benco V90 firmware (the .pac file you downloaded).
- Select the .pac file and click Open. The tool will load the firmware, and you’ll see the file details in the interface.
Prepare the Phone
- Power off your Benco V90 completely.
- Do not connect it to the PC yet.
Start the Flashing Process
- In the SPD Flash Tool, click the Start Downloading button (usually a play arrow icon or the third button in the middle).
- The tool will switch to "Waiting" mode, indicating it’s ready to detect your phone.
Connect the Phone
- With the phone powered off, press and hold the Volume Down key (some devices may require Volume Up or both; check your firmware’s instructions).
- While holding the key, connect the phone to your PC via the USB cable.
- Release the key once the flashing process begins. You’ll see a progress bar moving in the SPD Flash Tool.
Monitor the Flashing
- The tool will display a progress bar as it flashes the firmware. This may take a few minutes.
- Do not disconnect the phone or interrupt the process.
Completion
- Once finished, a green Passed or Download OK message will appear in the SPD Flash Tool.
- Disconnect your Benco V90 from the PC and power it on manually.
- The first boot may take longer as the system initializes.
File Name:benco_AE9120_S192_23K20 [Dead Boot Repair].rar
Download Link
Your Download is Almost Ready
Please wait 30 seconds...
Download Now
No comments:
Thanks For your comment